| Event List |
| Event List |
General
Name the event file and make it on or off.
|
Trigger
You may activate the following trigger types as you wish depends on various conditions :
-
Motion Detection :
Click it on for using Motion Detection function as a sensor. You must configure motion detection function before taking this as the trigger. Set minimum time interval between 2 triggers, and choose the desired detection area. The detection type individually stands for the following meanings :
Start :
The trigger would be activated when the target object starts to move.
Stop :
The trigger would be activated when the target object stops to move.
Start-Stop :
The trigger would be activated during the target object starts to move till it stops.
-
Audio Detection :
Click it on for using Audio Detection function as a sensor. You must configure audio detection function before taking this as the trigger. Set minimum time interval between 2 triggers. The detection type stands for the following meanings individually :
Start :
The trigger would be activated when the sound being made.
Stop :
The trigger would be activated when the sound being cut off.
Start-Stop :
The trigger would be activated during the sound being made and cut off.
-
Periodical :
This can be set the certain period(by minute) to start the trigger.
-
On boot :
The event is triggered when the IP Camera has been started over.
-
Capacity Warning :
This is triggered when SD Card capacity is be below the value you set.
-
Network Link Down :
The event is triggered when the network get disconnected.
-
IP Notification :
The event is triggered when the network being restarted or the IP being changed. And there are optional network types to select, such as DHCP、Static IP and PPPoE.
|
Action
There are multiple choices for action taking which is optional for user to select all of them or part of them :
-
Send Image :
You may set up where the image sent to, options like event server and SD card. You must configure it first, please refer to Event Server.
-
Send Notification :
Firstly got to HTTP server configure the HTTP server URL, port, User ID, Password, and Proxy server settings.
Note :
The setting of URL should be the same as CGI.
-
PTZ Action :
Firstly configure the PTZ to set up the preset positions and tour you desired. You may select to return to the last position after the event being triggered.
-
Night Mode :
You may set up this action being activated continually while the event triggered or continually every period(by second) interval.
Note :
Only Motion Detection excludes Night Mode.
|
Schedule
You may set up the event schedule as "always" or scheduled by working day, weekend or night mode. You must configure schedule before using it.
|
|
Return to Help main page
|
|